Free Help & Advice 090 9673261

How Much Is Pallet Racking In Ireland? A Real Cost Guide (Including Q1 Budget Planning)

How Much Is Pallet Racking In Ireland? A Real Cost Guide (Including Q1 Budget Planning)

Somewhere between the year-end stock count and the Q1 budget meeting, someone asks, "How much is pallet racking going to cost?" and the person holding the pen wants a real figure. Here's ours. A 2700mm Kimer starter bay costs €605.20 to €962.80 ex VAT depending on height, weight per level and total amount of levels, and every bay you add after it costs less.

We'd budget per pallet position rather than per bay, because a low-priced bay can be the dearest way to store a pallet. Every price here comes from our own range. We checked them in November 2026, they're shown ex VAT, and the totals you'll sign off also show VAT at 23%.

Estimated reading time: 9 minutes

In this article:

  • How much does pallet racking cost per bay?
  • What does one pallet position actually cost?
  • Why is pallet racking so expensive?
  • When is longspan the better buy?
  • How much do delivery and installation add?
  • What does it cost to rack a 200 m² warehouse?
  • Your Q1 capacity planning checklist
  • Choosing the right pallet racking for your Q1 budget

How much does pallet racking cost per bay?

A 2700mm bay of our Kimer industrial pallet racking costs €605.20 to €962.80 ex VAT as a starter, and €430.20 to €672.80 as an extender. A bay is one section of racking, with two upright frames, pairs of beams between them and pallets sitting across the beams.

The starter stands on its own, so it comes with two full end frames. An extender connects onto it and shares one of its frames. That's why it costs less, and why a run of six bays is one starter and five extenders. Price every bay as a starter and a six-bay run of 2700mm three-level bays comes out €875.00 to €1,450.00 dearer than it needs to be.

Here's what a 2700mm bay costs at each height, since that's the width that takes three Euro pallets per level:

Frame height Starter, 2 levels Starter, 3 levels Extender, 3 levels What it suits
3000mm €605.20 €732.80 €557.80 Low units and space under a mezzanine
4000mm €675.20 €802.80 €592.80 Most small industrial units
5000mm €745.20 €872.80 €627.80 Standard business park units
6000mm €835.00 €962.80 €672.80 Taller units with a reach truck
Frame height
3000mm
Starter, 2 levels
€605.20
Starter, 3 levels
€732.80
Extender, 3 levels
€557.80
What it suits
Low units and space under a mezzanine
Frame height
4000mm
Starter, 2 levels
€675.20
Starter, 3 levels
€802.80
Extender, 3 levels
€592.80
What it suits
Most small industrial units
Frame height
5000mm
Starter, 2 levels
€745.20
Starter, 3 levels
€872.80
Extender, 3 levels
€627.80
What it suits
Standard business park units
Frame height
6000mm
Starter, 2 levels
€835.00
Starter, 3 levels
€962.80
Extender, 3 levels
€672.80
What it suits
Taller units with a reach truck

All prices ex VAT, checked November 2026.

Notice that the extender saves more as the frame gets taller, €175.00 at 3000mm and €290.00 at 6000mm, because the frame you don't buy is a bigger piece of steel.  

What does one pallet position actually cost?

On our range, a pallet position on the beams costs €61.98 to €200.00 ex VAT. Nearly all of that spread comes from how many pallets each bay holds. Divide every bay price by its pallets before you compare. Bulk order discounts are available on selected bays.

Beam length sets how many pallets you'll fit on a level. SEMA, the UK racking trade body, works on a 75mm gap between pallets and between a pallet and the upright, so a Euro pallet loaded long side in needs about 875mm of beam.

Beam length Euro pallets per level UK pallets per level Extender cost per position (4000mm, 3 levels)
2300mm 2 2 €90.00
2700mm 3 2 €65.87
3300mm 3 3 €81.67
Beam length
2300mm
Euro pallets per level
2
UK pallets per level
2
Extender cost per position (4000mm, 3 levels)
€90.00
Beam length
2700mm
Euro pallets per level
3
UK pallets per level
2
Extender cost per position (4000mm, 3 levels)
€65.87
Beam length
3300mm
Euro pallets per level
3
UK pallets per level
3
Extender cost per position (4000mm, 3 levels)
€81.67

If you're on Euro pallets, buy the 2700mm beam. It's the shortest one that fits three of them. The 3300mm beam is for 1200 x 1000mm UK pallets, which need the wider face.

A 6000mm starter with 2300mm beams and two levels works out at €200.00 per position. A 3000mm extender with 2700mm beams and three levels is €61.98. That's the same supplier, three times dearer per pallet, purely on how the bay is set up.

Those figures count beam positions only. If you also stand pallets on the floor under the first beam, each bay gains a row and on a three-level bay the cost per position drops by a quarter.

We recommend:

Pallet Racking 1100mm Depth - Starter
Pallet Racking 1100mm Depth - Starter
View Product
Pallet Racking 1100mm Depth - Extender
Pallet Racking 1100mm Depth - Extender
View Product

Best suited to: one starter at the head of each run with extenders after it, on 2700mm beams for Euro pallets or 3300mm for UK pallets.  

Why is pallet racking so expensive?

You're paying for high quality steel, and on a starter bay from our range the cost splits roughly evenly between frames and beams. Height drives the frame cost and the number of levels drives the beam cost, which is why those two move the price more than anything else.

Our Kimer racking is strong structural steel with pre-galvanised frames, so each level carries up to 3000kg evenly spread, which is three Euro pallets of up to 1000kg each. We also can provide lower KG and higher KG per level depending on what is being stored.

Height

A taller frame buys more space between levels, not more pallets. Every frame on our range comes with two or three beam levels, so a three-level 6000mm extender holds nine Euro pallets, the same as a 3000mm one. It just costs more per position, €74.76 against €61.98.

What the extra height gives you is room, so taller loads fit on each level. Pick the lowest frame that clears your tallest loaded pallet on every level and still fits under your roof. Send us your tallest load height and we'll check the beam spacing against it.

Beam levels

The third level is nearly always the lowest cost pallet position you can buy. A 4000mm starter with 2700mm beams costs €675.20 with two levels and €802.80 with three. You've added three pallets for a pair of beams, so the cost per position falls from €112.53 to €89.20.

Decking and protection

You only need wire mesh decking for loose cartons or mixed pallets that won't sit across the beams. It's also used where sprinkler water has to pass through a level. If your stock needs it, our wire mesh decking for a 2700mm level is one €70.00 deck.

The HSA's code of practice on industrial trucks lists damage to racking by trucks among the commonest incidents. Its falling objects fact sheet says uprights must be protected from knocks, and damaged racking can't be used until it's fixed.

A guard on each run end and a column guard on the aisle-facing upright of every frame cost far less than a repair.

We recommend:

Mesh Deck 2.7 Metre x 1100mm 1000KG Galvanised
Mesh Deck 2.7 Metre x 1100mm 1000KG Galvanised
View Product
Frame Protector Guard Single 1200mm
Frame Protector Guard Single 1200mm
View Product
80mm High Density Polyethylene Single Upright HDPE Upright Protector (Plastic)
80mm High Density Polyethylene Single Upright HDPE Upright Protector (Plastic)
View Product

Best suited to: decking for loose stock on 2700mm levels, a frame guard on every exposed run end and an upright protector on the aisle-facing upright of every frame.  

When is longspan the better buy?

Longspan is the better buy when people pick stock by hand rather than load pallets with a truck. Paying for 3000kg levels to hold boxes someone lifts at waist height is money spent on strength you'll never use.

Our longspan carries 500kg per level, evenly spread, on timber or steel shelves. The 600mm deep timber starter begins at €215.00 ex VAT. Plenty of the warehouses we fit out run both, with pallet racking for bulk stock and a line of longspan by dispatch for fast picks.

We recommend:

Longspan Shelving 600mm Depth Laminated Timber - Starter
Longspan Shelving 600mm Depth Laminated Timber - Starter
View Product
Longspan Shelving 400mm Depth Steel Panels - Starter
Longspan Shelving 400mm Depth Steel Panels - Starter
View Product

Best suited to: hand-picked stock beside the pallet racking, with 600mm deep timber shelves for full-size cartons and 400mm deep steel panels for smaller items in tight aisles. Every depth is in our longspan shelving range.  

How much do delivery and installation add?

Palletised orders like racking cost up to €240.00 to deliver and you'll see the exact charge in your basket before you pay. Larger racking orders qualify for free shipping and further unit price discounts, and the 24 bays in the worked example below go free. Our delivery information covers next working day delivery and the rest.

Site access matters more than the charge, because the lorry is an 18-tonne rigid and the driver can't usually wait longer than 20 minutes. Anything longer than about 1.8 metres may need a forklift to unload, and that's every frame we sell. Have a truck and a driver free on the day.

Can you install pallet racking yourself?

Yes, as long as a competent person does it, meaning someone with the training and experience to install racking safely. Our Kimer racking is boltless, so the beams go in with no screws or special tools, though the HSA still expects racking to go up to the maker’s instructions with proper anchorage. If nobody on your team fits that description, use a professional installer. Budget for floor fixings from our racking accessories, where anchor bolts come in packs of 50 for €70.00.

Our pallet racking installation service covers the whole of Ireland and is priced by quote.

What does it cost to rack a 200 m² warehouse?

A 200 m² warehouse racked with our Kimer bays would come to €18,345.60 ex VAT before installation, or €22,565.09 inc VAT at 23%. That buys 216 pallet positions on the beams, or €84.93 per position ex VAT.

How much does warehouse racking cost for a unit like yours? Swap any of these assumptions for your own:

  • a clear 20m x 10m floor, level, with height for 5000mm frames
  • a reach truck working in 2.7m aisles, a widely used guideline that depends on your truck (our guide to pallet racking has more on aisle widths)
  • four rows across the 10m width, one on each wall and a back-to-back pair in the middle
  • six bays per row along 17m, leaving about 3m for a cross aisle and the door
  • Euro pallets on 2700mm beams with three levels
Item Quantity Price each (ex VAT) Line total (ex VAT)
Starter bay, 5000 x 2700mm, 3 levels 4 €872.80 €3,491.20
Extender bay, 5000 x 2700mm, 3 levels 20 €627.80 €12,556.00
Frame Protector Guard Single 1200mm (wall run ends) 4 €197.20 €788.80
Frame Protector Guard Double 2400mm (back-to-back ends) 2 €179.80 €359.60
80mm HDPE upright protector (aisle-facing upright, one per frame) 28 €30.00 €840.00
Anchor bolts M10 x 90mm, pack of 50 3 €70.00 €210.00
Racking load capacity sign 4 €25.00 €100.00
Delivery (24 bays, free shipping tier) 1 €0.00 €0.00
Installation quote n/a not included
Total ex VAT €18,345.60
Total inc VAT at 23% €22,565.09
Item
Starter bay, 5000 x 2700mm, 3 levels
Quantity
4
Price each (ex VAT)
€872.80
Line total (ex VAT)
€3,491.20
Item
Extender bay, 5000 x 2700mm, 3 levels
Quantity
20
Price each (ex VAT)
€627.80
Line total (ex VAT)
€12,556.00
Item
Frame Protector Guard Single 1200mm (wall run ends)
Quantity
4
Price each (ex VAT)
€197.20
Line total (ex VAT)
€788.80
Item
Frame Protector Guard Double 2400mm (back-to-back ends)
Quantity
2
Price each (ex VAT)
€179.80
Line total (ex VAT)
€359.60
Item
80mm HDPE upright protector (aisle-facing upright, one per frame)
Quantity
28
Price each (ex VAT)
€30.00
Line total (ex VAT)
€840.00
Item
Anchor bolts M10 x 90mm, pack of 50
Quantity
3
Price each (ex VAT)
€70.00
Line total (ex VAT)
€210.00
Item
Racking load capacity sign
Quantity
4
Price each (ex VAT)
€25.00
Line total (ex VAT)
€100.00
Item
Delivery (24 bays, free shipping tier)
Quantity
1
Price each (ex VAT)
€0.00
Line total (ex VAT)
€0.00
Item
Installation
Quantity
quote
Price each (ex VAT)
n/a
Line total (ex VAT)
not included
Item
Total ex VAT
Quantity
Price each (ex VAT)
Line total (ex VAT)
€18,345.60
Item
Total inc VAT at 23%
Quantity
Price each (ex VAT)
Line total (ex VAT)
€22,565.09

The racking itself is €16,047.20 of that. Guards and fixings add about 14% on top.

Use the floor under the first beam too and you get 288 positions, which brings each one down to €63.70 ex VAT.

Volume discounts can lower the list total.

If your tallest pallet is lower, a 4000mm frame brings the cost per position down. Two other choices change the answer most. Counterbalance trucks usually need aisles of around 3.0 to 3.4m, depending on the truck, and in a 10m wide unit that usually costs you a row, so you'd have about a quarter fewer positions. Mesh decking on all 72 levels would add €5,040.00, which is only worth it if the stock really is loose.

Revenue lists 23% as the current standard VAT rate, so if your business reclaims VAT, the ex VAT figure is the one that hits your budget.

Your Q1 capacity planning checklist

Order in December and fit in January, and Q1 starts with the space already working instead of waiting on fitters. Run through this list before ordering:

  • Count the pallets you hold now, add your Q1 growth and work back to positions.
  • Check whether you're on Euro or UK pallets before choosing a beam length.
  • Measure clear height under the lowest light or sprinkler head, not to the eaves.
  • Take the aisle width from your truck's spec sheet and draw the layout to it.
  • Price each run as one starter plus extenders, then add the guards and floor fixings.
  • Confirm access for an 18-tonne rigid and have a forklift on site for the frames.
  • Book the installation quote early if you're not fitting it yourselves.
  • Put the first inspection in the diary before the racking is loaded.

The HSA expects racking to be checked regularly for damage, with the maximum safe load marked on every rack. An expert inspection at least once a year is widely recommended practice under the European standard for racking in use. SEMA's racking inspection guidance also suggests a weekly visual check by a named member of staff.

Second-hand racking can tempt a tight budget, but SEMA's advice on buying second-hand racking is that its history is hard to trace and any replacement part must be an approved one.

Choosing the right pallet racking for your Q1 budget

Start with your pallet and your truck. Between them they fix the beam length and the aisle, and the aisle decides how many rows you get. Then pick the lowest three-level frame that clears your tallest loaded pallet on every level, and buy one starter per run with extenders for the rest.

Here's how the main set-ups compare per pallet position, using three-level extender bays:

Your space Bay size Extender (ex VAT) Cost per position (ex VAT) Best suited to
Short loads, Euro pallets 3000 x 2700mm €557.80 €61.98 Low loads that clear each level, units under about 4m clear
Typical unit, Euro pallets 5000 x 2700mm €627.80 €69.76 Business park units with a reach truck
Tall loads, Euro pallets 6000 x 2700mm €672.80 €74.76 Tall or stacked loads that need more space between levels
UK pallets 4000 x 3300mm €735.00 €81.67 Three 1200 x 1000mm pallets per level
Your space
Short loads, Euro pallets
Bay size
3000 x 2700mm
Extender (ex VAT)
€557.80
Cost per position (ex VAT)
€61.98
Best suited to
Low loads that clear each level, units under about 4m clear
Your space
Typical unit, Euro pallets
Bay size
5000 x 2700mm
Extender (ex VAT)
€627.80
Cost per position (ex VAT)
€69.76
Best suited to
Business park units with a reach truck
Your space
Tall loads, Euro pallets
Bay size
6000 x 2700mm
Extender (ex VAT)
€672.80
Cost per position (ex VAT)
€74.76
Best suited to
Tall or stacked loads that need more space between levels
Your space
UK pallets
Bay size
4000 x 3300mm
Extender (ex VAT)
€735.00
Cost per position (ex VAT)
€81.67
Best suited to
Three 1200 x 1000mm pallets per level

If your loads need the room, budget on the 5000 x 2700mm row; where your pallets fit a lower frame, that's the better buy. Hand-picked stock belongs on longspan instead. Add the frame and upright guards to every run, and mesh decking only on levels that hold loose stock.

We're 100% Irish owned and the sole Irish distributor of Kimer racking, with our stock held in our 80,000 sq ft warehouse in Ballinasloe, Co. Galway. You can price your own layout in our pallet racking configurator. 

If you're not sure which bays or how many your space needs, get in touch with our team or call +353 (0)90 9673261 and we'll work it through with you.

Disclaimer: Prices were checked on rackzone.ie in November 2026 and are shown ex VAT. They can change, so the price on the live product page is the one that applies. The 200 m² example is an illustration, not a quote, and your own layout and site will change the total. Safety guidance here is general. Always follow the manufacturer’s instructions and HSA requirements, and have your racking inspected by a competent person.  

Ciaran Duffy

Ciaran Duffy

Director


Ciaran is a seasoned storage solutions expert and Director at RackZone, with over 10 years of experience providing high quality shelving, pallet racking, and storage systems to private and commercial clients across Ireland and the UK. His deep understanding of warehouse logistics and space optimisation makes him a trusted voice in the industry. Whether advising on large-scale industrial fit-outs or smart storage for small businesses, Ciaran is passionate about helping clients find efficient, durable, and cost-effective solutions. His expertise lies in warehouse planning, racking systems, and end to end storage project management.